Difference: MiniProd2Run10 (1 vs. 14)

Revision 142011-04-21 - PeterWinter

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
Changed:
<
<
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so

Update 20 Feb

  1. Processed a few hundred runs. Ran into problems with the mta analysis seg faulting on some fraction of the files
  2. Investigated seg faults. Problem had to do with multiple methods trying to release memory
  3. Restarted Last night. More files are processed, but seg faults remain
  4. In general, you can find the files at /usr/projects/bkiburg/run10/pass3_prod/merged_ana.root or merged_mta.root for investigation for run10, and /usr/projects/bkiburg/run11/pass3_prod/ for run11

Update 13 Feb

  1. DONE Seg. Faults were generated by MIDAS buffer overruns. MIDAS buffer have been increased and recompiled in
  2. DONE EH Pixel Selection definition were refined -
  3. DONEMusc_lo has been added to an additional set of banks, available in mu, allowing an out of time musc_lo to veto an otherwise good muon
  4. HourglassNeed to add a flag to the tree when the a musc-hit would be disallowed due to the the musclo veto
  5. After this mini-pass, we will include some of Steven's code (Peter has worked on this already)
  6. Plot updates
    1. How much does musc-lo vetoing suppress the data rate : (~8%). Red curve is with musclo, Black is traditional one. musc_pugate.png
    1. How does EH anode requirement affect run->run conclusions?
      Fixed definition wrt 0 bin - added GoodMuon /BestEntrance requirement (in red)
      contEH.png
    1. Reran on run10 and run11 to show run11 has more anodes, on average. Results not ready yet runcomp.png

New Issues To Address

  1. People should sign off on Neutron/WFD/Fadc analysis
  2. Insert a check into the analysis that the run number in the odb matches the run number in the file name
  3. DONEUpdate earlier /src/shared modules to take advantage of run9 run10 flexibility in timing offsets [This was a large step]
    1. DONEUpdate the Runinfo/Run number variable earlier in the analysis (mana.c) so that this is available at mehod initialization
    2. Several parameters have been modified to have sub branches in the odb, based on run number
    3. A new master.odb file should be used with all analysis (CVS is up-to-date)
  4. DONEModify run list for run10 to focus on runs with higher quality FADC data (avoid 385xx and use 423xx instead) [Note: some files won't have full FADC updates, but the original list has a good selection from throughout the run]
  5. DONERemove unnecessary diagnostic output from the main
  6. Peter would like to incorporate some of Steven's MucapDevel code into the production. We need to see how many differences there are in his most up-to-date version and how this may conflict with our more recent code developments
  7. HourglassUpdate the mta analysis to provide more useful output
    1. EH Anodes at end of track (total vs. continuous) EH_eot.png
    2. Lifetime vs. pixels tdist.png
    3. Entrance counter plots
  8. DONE Fixed some memory leaks in the code
  9. Recent investigation in the mta analysis has produced occasional seg-faults. The frequency and or causes need to be diagnosed before producing lots of trees that cannot be processed in the subsequent pass

Analysis information

  1. DONECVS should be kept up to date so developers can properly integrate their code
  2. DONEFADC analysis integrated into the production code
  3. DONENeutron analysis integrated into the production code
  4. DONEWFD analysis integrated into the production code
  5. Stop Discussion about what data, if any, should be skimmed from these files :next pass
  6. My changes with respect to : entrance counters, MuStop defintion
Organizational information
  1. CVS should be kept up to date so developers can properly integrate their code
  2. Hourglass Project space needs to be allocated from NCSA : in progress
  3. DONE ODB files and Parameters file need to be used separately for run 10, run 11 files
  4. DONE A run list needs to be selected (neutron, muminus, muplus, run10, run11)
    1. Proposed run list for run 10 files minipass_run10_files.txt (10 neutron, 100 mu plus, 500 mu minus)
    2. Proposed run list for run 11 files minipass_run11_files.txt ( 39 neutron, 200 argon, 100 muplus, 200 mu minus)
  5. DONEThe files need to be transferred to scratch or project space prior to launching the jobs. Run 10 files took about 26 hours for ~700 files.

Proposed plan

  1. "Complete" the steps in "Analysis Information," and run over a few files
  2. Individual users check that relevant histograms/data appear in the root/tree files and match the output from their code
  3. When those are signed off on, we can run over several hundred files with 'mu'
  4. Those can be processed with mta
  5. Results can be summed and examined

Full file listings

>
>
Please go to https://muon.npl.washington.edu/twiki/bin/view/Main/MiniProd2Run10
 
META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run11.txt" date="1200685336" name="neutron_run11.txt" path="neutron_run11.txt" size="234" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run10.txt" date="1200685309" name="neutron_run10.txt" path="neutron_run10.txt" size="72" user="Main.BrendanKiburg" version="1"

Revision 132008-02-20 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so

Added:
>
>
Update 20 Feb
  1. Processed a few hundred runs. Ran into problems with the mta analysis seg faulting on some fraction of the files
  2. Investigated seg faults. Problem had to do with multiple methods trying to release memory
  3. Restarted Last night. More files are processed, but seg faults remain
  4. In general, you can find the files at /usr/projects/bkiburg/run10/pass3_prod/merged_ana.root or merged_mta.root for investigation for run10, and /usr/projects/bkiburg/run11/pass3_prod/ for run11
 *Update 13 Feb *
  1. DONE Seg. Faults were generated by MIDAS buffer overruns. MIDAS buffer have been increased and recompiled in
  2. DONE EH Pixel Selection definition were refined -
Line: 11 to 18
 
  1. After this mini-pass, we will include some of Steven's code (Peter has worked on this already)
  2. Plot updates
    1. How much does musc-lo vetoing suppress the data rate : (~8%). Red curve is with musclo, Black is traditional one.
Changed:
<
<
musc_pugate.png
    1. How does EH anode requirement affect run->run conclusions?
      Fixed definition wrt 0 bin - added GoodMuon/BestEntrance requirement (in red)
      contEH.png
>
>
musc_pugate.png
    1. How does EH anode requirement affect run->run conclusions?
      Fixed definition wrt 0 bin - added GoodMuon /BestEntrance requirement (in red)
      contEH.png
 
    1. Reran on run10 and run11 to show run11 has more anodes, on average. Results not ready yet
Changed:
<
<
runcomp.png

>
>
runcomp.png
  New Issues To Address
  1. People should sign off on Neutron/WFD/Fadc analysis
Line: 32 to 37
 
  1. DONERemove unnecessary diagnostic output from the main
  2. Peter would like to incorporate some of Steven's MucapDevel code into the production. We need to see how many differences there are in his most up-to-date version and how this may conflict with our more recent code developments
  3. HourglassUpdate the mta analysis to provide more useful output
Changed:
<
<
    1. EH Anodes at end of track (total vs. continuous) EH_eot.png
    2. Lifetime vs. pixels tdist.png
>
>
    1. EH Anodes at end of track (total vs. continuous) EH_eot.png
    2. Lifetime vs. pixels tdist.png
 
    1. Entrance counter plots
  1. DONE Fixed some memory leaks in the code
  2. Recent investigation in the mta analysis has produced occasional seg-faults. The frequency and or causes need to be diagnosed before producing lots of trees that cannot be processed in the subsequent pass
Line: 72 to 77
 
Deleted:
<
<

 
META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run11.txt" date="1200685336" name="neutron_run11.txt" path="neutron_run11.txt" size="234" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run10.txt" date="1200685309" name="neutron_run10.txt" path="neutron_run10.txt" size="72" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="musc_pugate_def" date="1202884417" name="musc_pugate.png" path="musc_pugate.png" size="9371" user="Main.BrendanKiburg" version="1"

Revision 122008-02-13 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008
Line: 16 to 16
  Fixed definition wrt 0 bin - added GoodMuon/BestEntrance requirement (in red)
contEH.png
    1. Reran on run10 and run11 to show run11 has more anodes, on average. Results not ready yet
Added:
>
>
runcomp.png
 

Line: 81 to 83
 
META FILEATTACHMENT attr="" autoattached="1" comment="Mini Pass Run 11 files" date="1200687459" name="minipass_run11_files.txt" path="minipass_run11_files.txt" size="3066" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muminus_run10.txt" date="1200685480" name="golden_minus_run10.txt" path="golden_minus_run10.txt" size="34720" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muplus_run10.txt" date="1200685448" name="golden_plus_run10.txt" path="golden_plus_run10.txt" size="8476" user="Main.BrendanKiburg" version="1"
Added:
>
>
META FILEATTACHMENT attr="" autoattached="1" comment="EH run comparison" date="1202917229" name="runcomp.png" path="runcomp.png" size="9265" user="Main.BrendanKiburg" version="1"
 
META FILEATTACHMENT attr="" autoattached="1" comment="EH Anodes at end of track" date="1202279757" name="EH_eot.png" path="EH_eot.png" size="9158" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="cont EH pixels with good muon def" date="1202885715" name="contEH.png" path="contEH.png" size="9057" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Argon_run11.txt" date="1200685278" name="argon.txt" path="argon.txt" size="3348" user="Main.BrendanKiburg" version="1"

Revision 112008-02-13 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so

Added:
>
>
*Update 13 Feb *
  1. DONE Seg. Faults were generated by MIDAS buffer overruns. MIDAS buffer have been increased and recompiled in
  2. DONE EH Pixel Selection definition were refined -
  3. DONEMusc_lo has been added to an additional set of banks, available in mu, allowing an out of time musc_lo to veto an otherwise good muon
  4. HourglassNeed to add a flag to the tree when the a musc-hit would be disallowed due to the the musclo veto
  5. After this mini-pass, we will include some of Steven's code (Peter has worked on this already)
  6. Plot updates
    1. How much does musc-lo vetoing suppress the data rate : (~8%). Red curve is with musclo, Black is traditional one. musc_pugate.png
    2. How does EH anode requirement affect run->run conclusions?
      Fixed definition wrt 0 bin - added GoodMuon/BestEntrance requirement (in red)
      contEH.png
    3. Reran on run10 and run11 to show run11 has more anodes, on average. Results not ready yet

  New Issues To Address
  1. People should sign off on Neutron/WFD/Fadc analysis
Line: 55 to 70
 
Added:
>
>

 
META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run11.txt" date="1200685336" name="neutron_run11.txt" path="neutron_run11.txt" size="234" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run10.txt" date="1200685309" name="neutron_run10.txt" path="neutron_run10.txt" size="72" user="Main.BrendanKiburg" version="1"
Added:
>
>
META FILEATTACHMENT attr="" autoattached="1" comment="musc_pugate_def" date="1202884417" name="musc_pugate.png" path="musc_pugate.png" size="9371" user="Main.BrendanKiburg" version="1"
 
META FILEATTACHMENT attr="" autoattached="1" comment="Mini Pass Run 10 files" date="1200686601" name="minipass_run10_files.txt" path="minipass_run10_files.txt" size="3659" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Mini Pass Run 11 files" date="1200687459" name="minipass_run11_files.txt" path="minipass_run11_files.txt" size="3066" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muminus_run10.txt" date="1200685480" name="golden_minus_run10.txt" path="golden_minus_run10.txt" size="34720" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muplus_run10.txt" date="1200685448" name="golden_plus_run10.txt" path="golden_plus_run10.txt" size="8476" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="EH Anodes at end of track" date="1202279757" name="EH_eot.png" path="EH_eot.png" size="9158" user="Main.BrendanKiburg" version="1"
Added:
>
>
META FILEATTACHMENT attr="" autoattached="1" comment="cont EH pixels with good muon def" date="1202885715" name="contEH.png" path="contEH.png" size="9057" user="Main.BrendanKiburg" version="1"
 
META FILEATTACHMENT attr="" autoattached="1" comment="Argon_run11.txt" date="1200685278" name="argon.txt" path="argon.txt" size="3348" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Time Dist vs. Anode info" date="1202279791" name="tdist.png" path="tdist.png" size="37981" user="Main.BrendanKiburg" version="1"

Revision 102008-02-06 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so

New Issues To Address

Changed:
<
<
  1. DONEUpdate the Runinfo/Run number variable earlier in the analysis (mana.c) so that this is available at mehod initialization
>
>
  1. People should sign off on Neutron/WFD/Fadc analysis
 
  1. Insert a check into the analysis that the run number in the odb matches the run number in the file name
Changed:
<
<
  1. DONEUpdate earlier /src/shared modules to take advantage of run9 run10 flexibility in timing offsets
>
>
  1. DONEUpdate earlier /src/shared modules to take advantage of run9 run10 flexibility in timing offsets [This was a large step]
    1. DONEUpdate the Runinfo/Run number variable earlier in the analysis (mana.c) so that this is available at mehod initialization
    2. Several parameters have been modified to have sub branches in the odb, based on run number
    3. A new master.odb file should be used with all analysis (CVS is up-to-date)
 
  1. DONEModify run list for run10 to focus on runs with higher quality FADC data (avoid 385xx and use 423xx instead) [Note: some files won't have full FADC updates, but the original list has a good selection from throughout the run]
Changed:
<
<
  1. DONERemove unnecessary diagnostic output from the main analysis
  2. Update the mta analysis to provide more useful output
>
>
  1. DONERemove unnecessary diagnostic output from the main
  2. Peter would like to incorporate some of Steven's MucapDevel code into the production. We need to see how many differences there are in his most up-to-date version and how this may conflict with our more recent code developments
  3. HourglassUpdate the mta analysis to provide more useful output
    1. EH Anodes at end of track (total vs. continuous) EH_eot.png
    2. Lifetime vs. pixels tdist.png
    3. Entrance counter plots
  4. DONE Fixed some memory leaks in the code
  5. Recent investigation in the mta analysis has produced occasional seg-faults. The frequency and or causes need to be diagnosed before producing lots of trees that cannot be processed in the subsequent pass
  Analysis information
  1. DONECVS should be kept up to date so developers can properly integrate their code
Line: 26 to 35
 
  1. DONE A run list needs to be selected (neutron, muminus, muplus, run10, run11)
    1. Proposed run list for run 10 files minipass_run10_files.txt (10 neutron, 100 mu plus, 500 mu minus)
    2. Proposed run list for run 11 files minipass_run11_files.txt ( 39 neutron, 200 argon, 100 muplus, 200 mu minus)
Changed:
<
<
  1. The files need to be transferred to scratch or project space prior to launching the jobs.
>
>
  1. DONEThe files need to be transferred to scratch or project space prior to launching the jobs. Run 10 files took about 26 hours for ~700 files.
  Proposed plan
  1. "Complete" the steps in "Analysis Information," and run over a few files
Line: 52 to 61
 
META FILEATTACHMENT attr="" autoattached="1" comment="Mini Pass Run 11 files" date="1200687459" name="minipass_run11_files.txt" path="minipass_run11_files.txt" size="3066" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muminus_run10.txt" date="1200685480" name="golden_minus_run10.txt" path="golden_minus_run10.txt" size="34720" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muplus_run10.txt" date="1200685448" name="golden_plus_run10.txt" path="golden_plus_run10.txt" size="8476" user="Main.BrendanKiburg" version="1"
Added:
>
>
META FILEATTACHMENT attr="" autoattached="1" comment="EH Anodes at end of track" date="1202279757" name="EH_eot.png" path="EH_eot.png" size="9158" user="Main.BrendanKiburg" version="1"
 
META FILEATTACHMENT attr="" autoattached="1" comment="Argon_run11.txt" date="1200685278" name="argon.txt" path="argon.txt" size="3348" user="Main.BrendanKiburg" version="1"
Added:
>
>
META FILEATTACHMENT attr="" autoattached="1" comment="Time Dist vs. Anode info" date="1202279791" name="tdist.png" path="tdist.png" size="37981" user="Main.BrendanKiburg" version="1"

Revision 92008-01-28 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so

Deleted:
<
<
 
Changed:
<
<
New Issues To Address
>
>
New Issues To Address
 
  1. DONEUpdate the Runinfo/Run number variable earlier in the analysis (mana.c) so that this is available at mehod initialization
  2. Insert a check into the analysis that the run number in the odb matches the run number in the file name
Changed:
<
<
  1. Update earlier /src/shared modules to take advantage of run9 run10 flexibility in timing offsets
  2. Modify run list for run10 to focus on runs with higher quality FADC data (avoid 385xx and use 423xx instead)
  3. Remove unnecessary diagnostic output from the main analysis
>
>
  1. DONEUpdate earlier /src/shared modules to take advantage of run9 run10 flexibility in timing offsets
  2. DONEModify run list for run10 to focus on runs with higher quality FADC data (avoid 385xx and use 423xx instead) [Note: some files won't have full FADC updates, but the original list has a good selection from throughout the run]
  3. DONERemove unnecessary diagnostic output from the main analysis
 
  1. Update the mta analysis to provide more useful output

Analysis information

Revision 82008-01-24 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008
Changed:
<
<
The following are some of the tasks that should be in place before starting the mini production pass in the next week or so Analysis information
>
>
The following are some of the tasks that should be in place before starting the mini production pass in the next week or so

New Issues To Address

  1. DONEUpdate the Runinfo/Run number variable earlier in the analysis (mana.c) so that this is available at mehod initialization
  2. Insert a check into the analysis that the run number in the odb matches the run number in the file name
  3. Update earlier /src/shared modules to take advantage of run9 run10 flexibility in timing offsets
  4. Modify run list for run10 to focus on runs with higher quality FADC data (avoid 385xx and use 423xx instead)
  5. Remove unnecessary diagnostic output from the main analysis
  6. Update the mta analysis to provide more useful output

Analysis information

 
  1. DONECVS should be kept up to date so developers can properly integrate their code
  2. DONEFADC analysis integrated into the production code
  3. DONENeutron analysis integrated into the production code
Line: 12 to 23
 Organizational information
  1. CVS should be kept up to date so developers can properly integrate their code
  2. Hourglass Project space needs to be allocated from NCSA : in progress
Changed:
<
<
  1. ODB files and Parameters file need to be used separately for run 10, run 11 files
>
>
  1. DONE ODB files and Parameters file need to be used separately for run 10, run 11 files
 
  1. DONE A run list needs to be selected (neutron, muminus, muplus, run10, run11)
    1. Proposed run list for run 10 files minipass_run10_files.txt (10 neutron, 100 mu plus, 500 mu minus)
    2. Proposed run list for run 11 files minipass_run11_files.txt ( 39 neutron, 200 argon, 100 muplus, 200 mu minus)

Revision 72008-01-24 - PeterWinter

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so Analysis information

  1. DONECVS should be kept up to date so developers can properly integrate their code
  2. DONEFADC analysis integrated into the production code
Changed:
<
<
  1. Neutron analysis integrated into the production code
>
>
  1. DONENeutron analysis integrated into the production code
 
  1. DONEWFD analysis integrated into the production code
  2. Stop Discussion about what data, if any, should be skimmed from these files :next pass
  3. My changes with respect to : entrance counters, MuStop defintion

Revision 62008-01-22 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008
Line: 6 to 6
 
  1. DONECVS should be kept up to date so developers can properly integrate their code
  2. DONEFADC analysis integrated into the production code
  3. Neutron analysis integrated into the production code
Changed:
<
<
  1. HourglassWFD analysis integrated into the production code
>
>
  1. DONEWFD analysis integrated into the production code
 
  1. Stop Discussion about what data, if any, should be skimmed from these files :next pass
  2. My changes with respect to : entrance counters, MuStop defintion
Organizational information

Revision 52008-01-22 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008
Line: 6 to 6
 
  1. DONECVS should be kept up to date so developers can properly integrate their code
  2. DONEFADC analysis integrated into the production code
  3. Neutron analysis integrated into the production code
Changed:
<
<
  1. WFD analysis integrated into the production code
>
>
  1. HourglassWFD analysis integrated into the production code
 
  1. Stop Discussion about what data, if any, should be skimmed from these files :next pass
  2. My changes with respect to : entrance counters, MuStop defintion
Organizational information

Revision 42008-01-18 - PeterWinter

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

Revision 32008-01-18 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so Analysis information

Changed:
<
<
  1. CVS should be kept up to date so developers can properly integrate their code DONE
  2. FADC analysis integrated into the production code DONE
>
>
  1. DONECVS should be kept up to date so developers can properly integrate their code
  2. DONEFADC analysis integrated into the production code
 
  1. Neutron analysis integrated into the production code
  2. WFD analysis integrated into the production code
Changed:
<
<
  1. Discussion about what data, if any, should be skimmed from these files Stop next pass
>
>
  1. Stop Discussion about what data, if any, should be skimmed from these files :next pass
 
  1. My changes with respect to : entrance counters, MuStop defintion
Organizational information
  1. CVS should be kept up to date so developers can properly integrate their code
Changed:
<
<
  1. Project space needs to be allocated from NCSA : Hourglass in progress
>
>
  1. Hourglass Project space needs to be allocated from NCSA : in progress
 
  1. ODB files and Parameters file need to be used separately for run 10, run 11 files
Changed:
<
<
  1. A run list needs to be selected (neutron, muminus, muplus, run10, run11)
>
>
  1. DONE A run list needs to be selected (neutron, muminus, muplus, run10, run11)
    1. Proposed run list for run 10 files minipass_run10_files.txt (10 neutron, 100 mu plus, 500 mu minus)
    2. Proposed run list for run 11 files minipass_run11_files.txt ( 39 neutron, 200 argon, 100 muplus, 200 mu minus)
 
  1. The files need to be transferred to scratch or project space prior to launching the jobs.

Proposed plan

Line: 22 to 24
 
  1. When those are signed off on, we can run over several hundred files with 'mu'
  2. Those can be processed with mta
  3. Results can be summed and examined
Added:
>
>
Full file listings

META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run11.txt" date="1200685336" name="neutron_run11.txt" path="neutron_run11.txt" size="234" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Neutron_run10.txt" date="1200685309" name="neutron_run10.txt" path="neutron_run10.txt" size="72" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Mini Pass Run 10 files" date="1200686601" name="minipass_run10_files.txt" path="minipass_run10_files.txt" size="3659" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Mini Pass Run 11 files" date="1200687459" name="minipass_run11_files.txt" path="minipass_run11_files.txt" size="3066" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muminus_run10.txt" date="1200685480" name="golden_minus_run10.txt" path="golden_minus_run10.txt" size="34720" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Golden_muplus_run10.txt" date="1200685448" name="golden_plus_run10.txt" path="golden_plus_run10.txt" size="8476" user="Main.BrendanKiburg" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Argon_run11.txt" date="1200685278" name="argon.txt" path="argon.txt" size="3348" user="Main.BrendanKiburg" version="1"

Revision 22008-01-18 - BrendanKiburg

Line: 1 to 1
 
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008
Line: 7 to 7
 
  1. FADC analysis integrated into the production code DONE
  2. Neutron analysis integrated into the production code
  3. WFD analysis integrated into the production code
Changed:
<
<
  1. Discussion about what data, if any, should be skimmed from these files [This only needs to be done once]
>
>
  1. Discussion about what data, if any, should be skimmed from these files Stop next pass
 
  1. My changes with respect to : entrance counters, MuStop defintion
Organizational information
  1. CVS should be kept up to date so developers can properly integrate their code
Changed:
<
<
  1. Project space needs to be allocated from NCSA
>
>
  1. Project space needs to be allocated from NCSA : Hourglass in progress
 
  1. ODB files and Parameters file need to be used separately for run 10, run 11 files
  2. A run list needs to be selected (neutron, muminus, muplus, run10, run11)
  3. The files need to be transferred to scratch or project space prior to launching the jobs.

Revision 12008-01-15 - BrendanKiburg

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="BrendanHomepage"
-- BrendanKiburg - 15 Jan 2008

The following are some of the tasks that should be in place before starting the mini production pass in the next week or so Analysis information

  1. CVS should be kept up to date so developers can properly integrate their code DONE
  2. FADC analysis integrated into the production code DONE
  3. Neutron analysis integrated into the production code
  4. WFD analysis integrated into the production code
  5. Discussion about what data, if any, should be skimmed from these files [This only needs to be done once]
  6. My changes with respect to : entrance counters, MuStop defintion
Organizational information
  1. CVS should be kept up to date so developers can properly integrate their code
  2. Project space needs to be allocated from NCSA
  3. ODB files and Parameters file need to be used separately for run 10, run 11 files
  4. A run list needs to be selected (neutron, muminus, muplus, run10, run11)
  5. The files need to be transferred to scratch or project space prior to launching the jobs.

Proposed plan

  1. "Complete" the steps in "Analysis Information," and run over a few files
  2. Individual users check that relevant histograms/data appear in the root/tree files and match the output from their code
  3. When those are signed off on, we can run over several hundred files with 'mu'
  4. Those can be processed with mta
  5. Results can be summed and examined
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback