, view all tags
-- PeterKammel - 29 May 2009

Dear Peter,

> Thanks for the info. If you could put make a good photo of the
> Baltzers side of the Baltzers/KF50 transition piece and then mark the
> various radii we can machine a suitable Balzers connection here. I assume the Balzers flange connecting to the Baltzers on the main pipe
> only needs to be flat polished, as the O-ring groove is on the flange on
> the main pipe side?
This is correct, the flanges are flat with 8 screw holes.

Therefore I have attached also a drawing of the measures
of the pipe side flange.

The blind flange is only 88mm diameter with the holes 5.4 mm diameter
on a circle with 75.7 mm diameter.
The O-ring is on the pipe side. I still have to get new O-rings

fotos of the pipe side connectors are attached.

best wishes

Edit | Attach | Watch | Print version | History: r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 2009-05-29 - PeterKammel
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback