Tags:
, view all tags

Shift Duties - MuSun Run 3 DRAFT

Overview

The primary responsibility of the shift crew is to maintain safe experimental conditions and take efficient and high quality data.
The shift crew can leave the experimental barack temporarely.

Main routine tasks:

  • Familiarize yourself with the manuals (links here)
  • Read the recent elogs and the ShiftCheckList_Run3.xls (where).
  • Follow measurement plan (verbal, white board or from log book)
  • Make sure that DAQ s running. This is monitored on the Midas Webpage.
  • Make sure that when runs are manually started, all the information on the info page is correctly updated

Main monitoring tasks:

In addition to the MIDAS status page you should monitor the experimental equipment via

  • monitor cryo TPC and CHUPS, it is essential for the safe operation of the experiment.
    • Basic Monitoring
      • cold head ~31K
    • Advanced documentation (insert link)
  • Once per shift fill out the checklist on zurban:/home/l_data/Desktop/Checklists, see desktop:5 on zurban.
  • observe online display:
    • Main spectra:
  • check HV and currents of chambers (Zurban desktop:1)
  • observe visual scalers
scaler   scaler  
1   7  
2   8  
3   9  
4   10  
5   11  
6   12  

  • observe separator HV, zurban desktop: 3
  • Logbook entries:
    • the main logbook is the elog. Report there
      • significant changes and observations (make extra new elog entry)
      • at the end of a shift, the shift leader has to write a brief summary, e.g. shift goals, good runs and special
        shift events. (Category General / Type Shift Summary)
    • The shift run summary is on http://cheetah/mucap/ by clicking on the runnumber a specific run can be edited (the usual PW).
      • Flag the run quality as "bad" if there is reason to believe the run is bad.
      • Add any special short comment in the comment box.
      • update the information (reload the browser window to see the updated info)

Usual trouble procedures:

  • DAQ troubles
  • Beam troubles:
    • First check visual scaler
    • If muSC is low, check separator, beamline
    • Recently, SEP was unstable, readjust by hand (elog:626)
  • ePC troubles

Emergency procedures:

  • Hydrogen pressure drop: call Claude, Malte
  • TPC trips: call Claude, Malte
  • Gas alarm: follow instructions:
  • hydrogen alarm: call Claude, Malte
  • CHUPS troubles: call Marat
  • DAQ problems
    • follow instructions: DAQ disaster recovery manual - not ready yet
    • call DAQ emergency number 5883 (Brendan, Fred)
  • ePC troubles: call Peter, Brendan, Genna
  • eSC troubles: call Brendan, Peter, Fred, Bernhard
  • mPC1 troubles: call Genna, Volodya
  • magnet/slow control: call Bernhard - pump problems : Mr Voegli call 3497 quad-magnet: Mr Thomas Scherer call 5934
Edit | Attach | Watch | Print version | History: r10 | r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 2010-11-06 - PeterKammel
 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback